This is the default IP login that is reserved for modems or wireless routers. Typing 10.0.0.138 in your browser’s address bar will give you access to your router’s admin interface. 10.0.0.138 is mainly used by brands such as Alcatel, Thomson or Siemens. This is not the only standard IP for routers. There are dozens of different IP addresses, such as 192.168.1.1, 192.168.0.1 or 192.168.2.1, that were used to access your DSL router, DSL modem or wireless router, access control panel. Such a standard IP is also called Default Gateway IP.
Few people know the IP address of the router, because in most cases there is only one situation when you need IP 10.0.0.138. That is, while the setup process is performed by a technician. This way, you never come in contact with 10.0.0.138. But sometimes you want to change SSID (Wi-Fi network name), WiFi password or parental control. Then you will need IP 10.0.0.138. After logging in to your router you will see a navigation bar where you can manage data traffic, view statistics and configure router settings.
Where is the login page for 10.0.0.138?
10.0.0.138 You just need to enter http://10.0.0.138 in your browser and you will be redirected to the login page of your admin panel.
If you are unsure of your password or encounter an incorrect password match, you can simply reset the modem to factory settings.
Password reset for 10.0.0.138?
All you need to do is reset the modem. This can be easily done by clicking the reset button on the back or bottom of your modem. If you hold this little button for about 20 seconds (you may have to use a toothpick), then your modem will be reset to factory settings.
What you need to keep in mind is that when you reset your modem you will lose your internet connection. Therefore it is better to seek the help of a specialist. If you do not have enough information, we recommend that you seek the help of a person who has such knowledge.
Default username and password combinations for devices that use 10.0.0.138 as the default IP address
This list will show you the most used default usernames and passwords for IP device 10.0.0.138.
| # | Username | Password |
| 1 | admin | admin |
| 2 | (empty) | (empty) |
| 3 | admin | password |
| 4 | (default) | (default) |
| 5 | admin | |
| 6 | admin | (empty) |
| 7 | (empty) | NOLOGIN |
| 8 | admin | BSNL1234 |
| 9 | admin | abcd12345 |
| 10 | admin | found on the router label |
Router models that use 10.0.0.138 as the default IP
2Wire 2071
DSL router
Default username: (blank)
Default password: (blank)
Technicolor / Thomson SpeedTouch Pro
DSL router
Default username: admin
Default password: admin
Technicolor / Thomson SpeedTouch Home
DSL modem
Default username: admin
Default password: admin
Wireless DSL router
Technicolor / Thomson SpeedTouch 530
DSL modem
Default username: (blank)
Default password: (blank)
DSL router
Netgear AirCard 782S
Mobile access point (3G / 4G MiFi)
Default username: admin
Default password: admin
NetComm 3G10WVT
Wireless router
Default username: admin
Default password: admin
Thomson SpeedTouch Pro 4-port FW
Default username: (blank)
Default password: (blank)
Huawei EchoLife-HG520i
Default username: admin
Default password: admin